How do you Fix a Broken Refrigerator

When your refrigerator breaks down, it can be a real hassle. Common problems include the ice maker not working. Water leaks onto the floor. Cooling fails and there are odd noises. These issues are fixable with some basic tools and a little know-how. In this article, we’ll guide you through the steps to fix these common fridge problems.

Home Appliances Repaired Dubai gives fridge repair service.
Call Us : +971589476388
By Email : Info@homeappliances.com

Tools Required

To start fixing your refrigerator, gather these tools. You’ll need a 4-in-1 screwdriver, an adjustable wrench, a hair dryer, a level, a long brush, a nut driver, and a vacuum. These tools will help you handle most refrigerator repairs.

Fixing Common Refrigerator Problems

Fixing your refrigerator yourself can save you a lot of money. It can also spare you the cost and bother of a service appointment. This article will walk you through the simplest fixes. They’re for the most common fridge problems. Look for easy fixes. You can often solve appliance problems without pros.

Refrigerator Repair Problem: It’s Ice Maker is on Strike

If your ice maker has stopped working, don’t panic. You can fix it yourself with a simple guide instead of calling for refrigerator service. An ice maker may stop working or make tiny cubes or gray ice. This happens because the water supply is partly or completely blocked. Here’s how to find and fix the blockage.

Check three common trouble spots: the water inlet tube, the saddle valve, and the inlet valve. We’ll go into more detail on each step below.

Easy Fixes for an Ice Maker

First, check the water inlet tube. Low water pressure could block the ice supply with ice. When water trickles into the tube and freezes, it’s plugged the path to the ice maker. To fix this, remove the ice maker by taking out the screws that hold it in place and unplugging the wiring harness. This will expose the water inlet tube.

Melt the ice.

Use a hair dryer to melt the ice blocking the water inlet tube. Once it’s melted, check if the water flows .

melt the ice

Unblock the saddle valve.

A saddle valve connects your ice maker to the household water supply. The issue might be a clogged needle hole in the pipe. To clear this blockage, find the saddle valve. It’s often found in an unfinished basement near the kitchen sink. Then, turn it clockwise to unblock it. This will clear any mineral deposits.

Replace the inlet valve.

If the water supply is fine but the ice maker still doesn’t work, the small electric inlet valve may be faulty. Turn off the saddle valve, disconnect the supply tube, and hold it over a bucket while a helper turns the water on. If water flows out, the inlet valve is likely bad. Replace it. Do this by unscrewing the cover panel and unplugging the wiring. Then, reverse these steps to install a new valve.

The fridge produces puddles of water.

Water supply lines for ice makers and water dispensers can leak. This creates pools of water around your fridge. Condensation or melting ice can also create water problems. Here’s how to deal with them.

Leak-Prone Parts of a Compression Fitting

Check the inlet valve and compression nuts on the water line. Tighten any loose fittings or replace the tubing if necessary.

Check the fridge with a level.

Ensure your fridge is level. If it’s tilted, water might spill from the drain pan. Adjust the front leveling screws to correct the tilt.

Use the changed screws.

Remove the front grille to access the change screws. Turn these screws to raise or lower the fridge’s front corners.

Lift the back cover panel.

If a water leak occurs inside the fridge, it may be due to a clogged drain tube. Unplug the fridge, remove the back cover panel, and clear any blockages in the drain tube.

Clear the drain hole.

Use a hair dryer to melt any ice buildup around the drain hole. It’s best to sop up the meltwater with a sponge and clean the drain hole. Insert a tube to blow out any debris.

Refrigerator Repair Problem: It’s Fridge or Freezer Won’t Cool

Your freezer stops freezing or your fridge isn’t cold enough. It might be a simple issue, like a loss of power. Check the breaker panel and make sure you plug in the fridge. If the fridge runs but doesn’t get cold, try these fixes.

Check the temperature control dial.

Make sure the temperature control dial is set . Sometimes, kids might turn it down . Also, make sure food containers aren’t blocking the vents. This applies to both the fridge and freezer compartments.

Clean the coils.

Dirty condenser coils can reduce your fridge’s cooling efficiency. Clean the coils on the back or underside of the fridge using a long brush and vacuum.

clean coils under the fridge

Clean the fan.

Dust buildup can slow the fan or stop it altogether. Pull out the fridge, unscrew the cover panel, and vacuum the fan to ensure it’s turned.

Diagnose a faulty refrigerator circuit board.

If your fridge isn’t cold and you’ve checked other parts, the circuit board might be the issue. Look for burn marks or sticking relays. Replace the board if necessary.

Refrigerator Repair Problem: A noisy fridge.

A noisy refrigerator can come from a failing compressor. It can also come from the condenser fan motor or the evaporator fan. Identify the source of the noise by pulling out the fridge and listening . Replace the noisy component if needed.

Remove it’s fan.

If the noise gets louder when you open the freezer, it’s the evaporator fan motor that might be the culprit. Remove the rear wall of the freezer, unplug the wires, and replace the motor.

Replace the old fan with a new one.

Install a new fan motor by fastening it to the mounting bracket and reconnecting the wires.

Replace the Old Fan

Finding Fridge Parts

To find the right parts for your refrigerator, check the model number stamped on a tag inside the fridge. Search for parts online or visit a local appliance parts dealer.

Don’t Wreck the Floor When You Pull Out the Fridge

When moving your fridge, protect your floor from damage. Lay down a cardboard runway or use hardboard for ultimate protection. A pair of shims can create a ramp for easier pulling.

FAQ’s

When your fridge breaks, what should you do?

First, identify the problem. Check for common issues. These include power supply, thermostat settings, and blocked vents. If necessary, consult the user manual or contact a professional technician.

How do you fix a refrigerator that isn’t cooling?

Make sure to plug in the fridge and set the thermostat. Clean the condenser coils. Check for obstructions in the vents. This will restore proper airflow.

What is the most common repair on a refrigerator?

The most common repair is fixing cooling issues. They’re often caused by dirty condenser coils, faulty thermostats, or blocked vents. Simple maintenance can usually solve them.

Can someone repair a fridge?

Yes, you can fix many fridge issues. The fixes range from small tasks like cleaning coils to replacing bad parts. They often extend it’s life.

Leave a Comment

Scroll to Top
Call Now Button